10k RoboDrill vs 10k 40taper

The Grudge Match. The FANUC 10K RoboDrill (left) vs. the Competitive 10K 40-taper VMC (right). Same speeds and feeds. Same cutters. Same aluminum.

The difference? With the RoboDrill, operators can achieve (assuming 10 tool changes per part):

✔️ 0.9 second tool change time
✔️ 37% reduction in cycle time
✔️ 10%+ improvement in ROI

The decision? It’s a TKO. So, if your part fits on a RoboDrill, it should be cut on a RoboDrill.